Two decades of ceria nanoparticle research: structure, properties and emerging applications.

Cerium oxide nanoparticles (CeNPs) are versatile materials with unique and unusual properties that vary depending on their surface chemistry, size, shape, coating, oxidation states, crystallinity, dopant, and structural and surface defects. This review encompasses advances made over the past twenty years in the development of CeNPs and ceria-based nanostructures, the structural determinants affecting their activity, and translation of these distinct features into applications. The two oxidation states of nanosized CeNPs (Ce3+/Ce4+) coexisting at the nanoscale level facilitate the formation of oxygen vacancies and defect states, which confer extremely high reactivity and oxygen buffering capacity and the ability to act as catalysts for oxidation and reduction reactions. However, the method of synthesis, surface functionalization, surface coating and defects are important factors in determining their properties. This review highlights key properties of CeNPs, their synthesis, interactions, and reaction pathways and provides examples of emerging applications. Due to their unique properties, CeNPs have become quintessential candidates for catalysis, chemical mechanical planarization (CMP), sensing, biomedical applications, and environmental remediation, with tremendous potential to create novel products and translational innovations in a wide range of industries. This review highlights the timely relevance and the transformative potential of these materials in addressing societal challenges and driving technological advancements across these fields.

Uniform Li Deposition through the Graphene-Based Ion-Flux Regulator for High-Rate Li Metal Batteries.

Lithium (Li) metal is considered an ultimate anode owing to its high specific capacity and energy density. However, uncontrolled Li dendrite growth and low Coulombic efficiency have limited the application of Li metal. Among various strategies introduced to address these limitations, the surface modification of polyolefin separators with functional materials has been widely adopted for improving the mechanical and thermal stabilities of polymer separators and to protect the separator from the penetration of Li dendrites. Herein, we report a new functional polymer separator that is surface-altered with a graphene-based Li-ion flux regulator (GLR) to homogenize the Li-ion flux and suppress the growth of sharp dendritic Li in Li metal batteries. The nanopores distributed through the GLR structure serve as channels for ion transport and junctions for electron transfer, facilitating efficient electrolyte penetration and rapid charge transfer between graphene (Gr) sheets. Owing to these favorable features of porous GLR, a Li-Cu cell with the GLR surface-altered polypropylene separator (GLR-PP) delivers excellent cycle and rate performances compared to a Li-Cu cell with a Gr surface-altered polypropylene separator. In addition, among the tested cells, Li-sulfur cells with GLR-PP exhibit the most stable cycle performance over 500 cycles. These results demonstrate that the concept of tailoring the surface of a polymer separator with porous 2D materials is an effective strategy for improving the long-term cycle stability and electrochemical kinetics of Li metal-based batteries and would trigger further relevant studies.

Achievements and challenges in improving air quality in China: Analysis of the long-term trends from 2014 to 2022.

Due to the implementation of air pollution control measures in China, air quality has significantly improved, although there are still additional issues to be addressed. This study used the long-term trends of air pollutants to discuss the achievements and challenges in further improving air quality in China. The Kolmogorov-Zurbenko (KZ) filter and multiple-linear regression (MLR) were used to quantify the meteorology-related and emission-related trends of air pollutants from 2014 to 2022 in China. The KZ filter analysis showed that PM2.5 decreased by 7.36 ± 2.92% yr-1, while daily maximum 8-h ozone (MDA8 O3) showed an increasing trend with 3.71 ± 2.89% yr-1 in China. The decrease in PM2.5 and increase in MDA8 O3 were primarily attributed to changes in emission, with the relative contribution of 85.8% and 86.0%, respectively. Meteorology variations, including increased ambient temperature, boundary layer height, and reduced relative humidity, also contributed to the reduction of PM2.5 and the enhancement of MDA8 O3. The emission-related trends of PM2.5 and MDA8 O3 exhibited continuous decrease and increase, respectively, from 2014 to 2022, while the variation rates slowed during 2018-2020 compared to that during 2014-2017, highlighting the challenges in further improving air quality, particularly in simultaneously reducing PM2.5 and O3. This study recommends reducing NH3 emissions from the agriculture sector in rural areas and transport emissions in urban areas to further decrease PM2.5 levels. Addressing O3 pollution requires the reduction of O3 precursor gases based on site-specific atmospheric chemistry considerations.

Deep-UV Transparent Conducting Oxide La-Doped SrSnO3 with a High Figure of Merit.

Perovskite stannate SrSnO3 (SSO) is attracting attention as ultraviolet transparent conducting oxides (UV TCOs) due to its ultrawide band gap and high conductivity. Here, we investigate in detail the thickness-dependent electrical, structural, and optical properties of sequentially strain-relaxed La-doped SrSnO3 (SLSO) epitaxial thin films. We find that the SLSO films grow as an orthorhombic Pnma phase with a - a - c + in the c + direction under the tensile strain. With the strain relaxation, as the films become thicker, vertical grain boundaries are created and the orthorhombic phase becomes reoriented to all three possible orientations. Simultaneously, the conductance starts to deviate from the linear behavior with increasing film thickness. Through the analysis of thickness fringes in optical transmittance, we found that a 120 nm thick nominally 4% La-doped SrSnO3 film has a figure of merit (φTC = 2.65 × 10-3 Ω-1) at λ = 300 nm in the deep-UV region, which is the highest value among the well-known candidates for UV TCOs reported to date.

Effects of Legal Regulation on Indoor Air Quality in Facilities for Sensitive Populations - A Field Study in Seoul, Korea.

Facilities for sensitive populations have increased in Korea; and its indoor air quality (IAQ) was strictly regulated by the Korean government compared to other facilities. However, merely public facilities on certain level of total floor area were lawfully regulated. This study aims to characterize the indoor environment at facilities for sensitive populations in Korea and investigate the effects of legal regulation on IAQ throughout the duration of 1 year. Sixty facilities for sensitive populations were investigated. Particulate matter (PM10), nitrogen dioxide (NO2), carbon dioxide (CO2), carbon monoxide (CO), total bacteria count (TBC), total volatile organic compound (TVOC), formaldehyde (HCHO), radon (Rn), ozone (O3), asbestos, fine particulate matter (PM2.5), and volatile organic compounds (VOCs) were target pollutants. As a result, none of the rooms' concentration of CO, NO2, O3, Rn, asbestos, and VOCs exceeded the Korean Standard of Indoor Air Quality, while some rooms' concentration of other pollutants exceeded the KSIAQ. Statutory facilities had lower indoor pollutant concentrations and exceedance rates due to efficient ventilation system and the lack of kitchen location within the building, as opposed to non-statutory facilities. In addition, the VOCs had significant differences depending on the number of years it took for the building to be constructed. To reduce the indoor pollutants concentrations, efficient ventilation systems should be installed while controlling the main sources of pollutants. In addition, construction and remodeling using eco-friendly materials should be considered. The standards of IAQ for small size facilities should be included in the KSIAQ in the future.

Effect of herbal extracts on bone regeneration in a rat calvaria defect model and screening system.

OBJECTIVES: The aim of this study was to evaluate the effects of herbal extracts on bone regeneration. Two known samples were screened. MATERIALS AND METHODS: We previously established a rat calvaria defect model using a combination of collagen scaffold and herbal extracts. An 8 mm diameter trephine bur with a low-speed dental hand piece was used to create a circular calvaria defect. The experimental group was divided into 4 classifications: control, collagen matrix, Danshen with collagen, and Ge Gan with collagen. Animals in each group were sacrificed at 4, 6, 8, and 10 weeks after surgery, and bone regeneration ability was evaluated by histological examination. RESULTS: Results revealed that both Danshen and Ge Gan extracts increased bone formation activity when used with collagen matrix. All groups showed almost the same histological findings until 6 weeks. However, after 6 weeks, bone formation activity proceeded differently in each group. In the experimental groups, new bone formation activity was found continuously up to 10 weeks. In the Danshen and Ge Gan groups, grafted materials were still present until 10 weeks after treatment, as evidenced by foreign body reactions showing multinucleated giant cells in chronic inflammatory vascular connective tissue. CONCLUSION: Histological analyses showed that Danshen and Ge Gan extractions increased bone formation activity when used in conjunction with collagen matrix.

Characterization of PM2.5 and identification of transported secondary and biomass burning contribution in Seoul, Korea.

The chemical and seasonal characteristics of fine particulates in Seoul, Korea, were investigated based on 24-h integrated PM2.5 measurements made over four 1-month periods in each season between October 2012 and September 2013. The four-season average concentration of PM2.5 was 37 µg m-3, and the major chemical components were secondary inorganic aerosol (SIA) species of sulfate, nitrate, and ammonium (49%), followed by organic matter (34%). The mass concentration and most of the chemical components of PM2.5 showed clear seasonal variation, with a winter-high and summer-low pattern. The winter-to-summer sulfate ratio and the winter organic carbon (OC)-to-elemental carbon (EC) ratio were unusually high compared with those in previous studies. Strong correlations of both the sulfate level and the sulfur oxidation ratio with relative humidity, and between water-soluble OC (WSOC) and SIA in winter, suggest the importance of aqueous phase chemistry for secondary aerosols. A strong correlation between non-sea salt sulfate and Na+ levels, a high Cl-/Na+ ratio, and an unusual positive correlation between the nitrogen oxidation ratio and temperature during the winter indicate the influence of transported secondary emission sources from upwind urban areas and from China across the Yellow Sea. Despite the absence of local forest fires and the regulation of wood burning, a high levoglucosan concentration and its correlations with OC and WSOC indicate that Seoul was affected by biomass burning sources in the winter. The unusually high water-insoluble OC (WIOC)-to-EC ratio in winter implies additional transported combustion sources of WIOC. The strong correlation between WIOC and levoglucosan suggests the likely influence of transported biomass burning sources on the high WIOC/EC ratio during the winter.

Intracorporeal reduction of condylar fracture using both pedicled condylar and seperated ramal fragments after vertical ramal osteotomy.

The aim of this study is to introduce a surgical technique that can maintain blood supply to prevent condylar resorption in the extracorporeal reduction of condylar fracture. Neither the medial pterygoid muscle on the ramal bone nor the lateral pterygoid muscle on the condylar fragment was detached after vertical ramal osteotomy. Thus, reduction was performed in the intracorporeal state. Therefore, blood supply was expected to be maintained to the fragments of both the condylar and ramal bones. On postoperative radiographs, the anatomical outline of the fractured condyle was well restored, and the occlusion was stable. In the unilateral case, there were no signs of mandibular condylar resorption until postoperative 3 weeks. In the 2 bilateral cases, condylar displacements with plate fractures and screw loosening were observed at postoperative 1 month or 5 months, but radiodensity at the displaced fracture site increased during the follow-up period. Finally, complete remodeling of the condylar fragments with restored anatomic appearance was observed on 8-month or 2-year follow-up radiographs. All cases exhibited good healing aspects with no signs or symptoms of mandibular condylar dysfunction during the postoperative remodeling period after intracorporeal reduction of condylar fracture.

Intramuscular hemangiomas on the masseter muscle and orbicularis oris muscle: a report of two cases.

Intramuscular hemangioma (IMH) is a rare vascular disease involving skeletal muscle, comprising only 0.8% of hemangiomas. About 10% to 15% of IMHs occur in the head and neck region, mostly involving the masseter muscle. IMH occurs mostly in childhood, but is often not found until unexpected enlargement, pain, or cosmetic asymmetry occurs in adulthood. Several non-surgical treatments including cryotherapy, sclerosant injection, and arterial ligature have been described, but complete surgical resection is the curative intervention. In this report, we present two rare cases of IMH. One IMH case in a 48-year-old male occurred in the masseter muscle feeding from the transverse facial artery. Embolization of the distal branch of the facial artery was first conducted, and then the buccal mass was removed surgically via the intraoral approach. A second IMH case in a 58-year-old female occurred in the orbicularis oris muscle feeding from the superior labial artery, and the mass was excised surgically without embolization.

Prostate adenocarcinoma mandibular metastasis associated with numb chin syndrome: a case report.

The purpose of this study is to report a rare case of mandibular adenocarcinoma that was diagnosed due to metastasis from the prostate. Numb chin syndrome (NCS), which was associated with this case, is also discussed. Computed tomography (CT) and an intraoral incisional biopsy of the left mandibular area were performed. Urology consultation, hormone therapy, chemotherapy and follow-up radiographic images were administered. Histological examination of the incised specimen revealed moderately differentiated adenocarcinoma. The Gleason score was 8 (primary 4/secondary 4). Immunohistochemical features and radiographic results confirmed the diagnosis of metastasis from prostate adenocarcinoma, moderately differentiated. The patient's prostate-specific antigen (PSA) level was very high. After hormone treatment, the patient's PSA levels dropped gradually. Seventeen months later, in May 2015, the PSA level was elevated. The 18-month follow-up CT image indicated that the patient's condition was aggravated. Docetaxel chemotherapy was started in June 2015 (18 months later), and the sixth cycle of the therapy is in progress. Oral metastases that originate from prostate adenocarcinoma are rare and can induce various periosteal reactions. Hormone therapy, chemotherapy and close follow-up could be additional, appropriate treatment, and were applied in this case. Finally, NCS is a valuable indicator of metastatic disease in the mandible.

Retiform hemangioendothelioma in the infratemporal fossa and buccal area: a case report and literature review.

We report a case of retiform hemangioendothelioma (RH) located in the infratemporal fossa and buccal area in a 13-year-old Korean boy. The tumor originated from the sphenoid bone of the infratemporal fossa area and spread into the cavernous sinus, orbital apex, and retro-nasal area with bone destruction of the pterygoid process. Tumor resection was conducted via Le Fort I osteotomy and partial maxillectomy to approach the infratemporal fossa and retro-nasal area. The diagnosis of RH was confirmed after surgery. In the presented patient, surgical excision was incomplete, and close follow-up was performed. There was no evidence of expansion or metastasis of the residual tumor in the 8 years after surgery. In cases of residual RH with low likelihood of expansion and metastasis, even though RH is an intermediate malignancy, close follow-up can be the appropriate treatment choice over additional aggressive therapy. To date, 29 papers and 48 RH cases have been reported, including this case. This case is the second reported RH case presenting as primary bone tumor and the first case originating in the oromaxillofacial area.

Size-dependent interactions of silica nanoparticles with a flat silica surface.

We have investigated the surface chemistry of SiO2 nanoparticles (NPs) with different sizes and their corresponding interactions with a flat substrate of surface curvature ∼0. As the size of the NPs increases, the SiO2 surface is increasingly covered with H-bonded silanol groups, thereby increasing the ζ-potential and shifting the isoelectric point higher in pH. Interactions between the SiO2 NPs and the flat SiO2 surface were analyzed in situ using quartz crystal microbalance with dissipation (QCM-D) method, and the results were interpreted based on an extended Derjaguin-Landau-Verwey-Overbeek theory. At very low ionic strength (1mM NaCl), there was no particle adsorption onto the surface due to the highly repulsive energy barriers to this interaction. On the other hand, QCM-D results showed that the significant adsorption of SiO2 NPs onto a flat SiO2 surface occurred under conditions of high ionic strength (100mM NaCl). Interestingly, the adsorption behaviors of three different-sized SiO2 NPs on the surface varied considerably with size. SiO2 NPs with small size have high adsorption affinity with the flat SiO2 surface due to an extremely low energy barrier for the interactions, whereas relatively large SiO2 NPs have very weak adsorption affinity with the flat surface due to the repulsive energy barrier formed by the increase in the electrostatic and hydration repulsion energy.

Synergistic Ultrathin Functional Polymer-Coated Carbon Nanotube Interlayer for High Performance Lithium-Sulfur Batteries.

Lithium-sulfur (Li-S) batteries have been intensively investigated as a next-generation rechargeable battery due to their high energy density of 2600 W·h kg(-1) and low cost. However, the systemic issues of Li-S batteries, such as the polysulfide shuttling effect and low Coulombic efficiency, hinder the practical use in commercial rechargeable batteries. The introduction of a conductive interlayer between the sulfur cathode and separator is a promising approach that has shown the dramatic improvements in Li-S batteries. The previous interlayer work mainly focused on the physical confinement of polysulfides within the cathode part, without considering the further entrapment of the dissolved polysulfides. Here, we designed an ultrathin poly(acrylic acid) coated single-walled carbon nanotube (PAA-SWNT) film as a synergic functional interlayer to address the issues mentioned above. The designed interlayer not only lowers the charge transfer resistance by the support of the upper current collector but also localizes the dissolved polysulfides within the cathode part by the aid of a physical blocking and chemical bonding. With the synergic combination of PAA and SWNT, the sulfur cathode with a PAA-SWNT interlayer maintained higher capacity retention over 200 cycles and achieved better rate retention than the sulfur cathode with a SWNT interlayer. The proposed approach of combining a functional polymer and conductive support material can provide an optimiztic strategy to overcome the fundamental challenges underlying in Li-S batteries.

The healing effect of platelet-rich plasma on xenograft in peri-implant bone defects in rabbits.

BACKGROUND: The association of biomaterial combined with repair factor-like platelet-rich plasma (PRP) has prospective values. Bovine-derived xenograft has been identified as an osteoconductive and biocompatible grafting material that provides osseointegration ability. PRP has become a valuable adjunctive agent to promote healing in a lot of dental and oral surgery procedures. However, there are controversies with respect to the regenerative capacity of PRP and the real benefits of its use in bone grafts. The purpose of this study was to assess the influence of PRP combined with xenograft for the repair of peri-implant bone defects. METHODS: Twelve rabbits were used in this study, and the experimental surgery with implant installation was performed simultaneously. Autologous PRP was prepared before the surgical procedure. An intrabony defect (7.0 mm in diameter and 3.0 mm deep) was created in the tibia of each rabbit; then, 24 titanium dental implants (3.0 mm in diameter and 8.5 mm long) were inserted into these osteotomy sites. Thus, a standardized gap (4.0 mm) was established between the surrounding bony walls and the implant surface. The gaps were treated with either xenograft alone (control group) or xenograft combined with PRP (experimental group). After healing for 1, 2, 3, 4, 5, and 6 weeks, the rabbits were sacrificed with an overdose of KCl solution. Two rabbits were killed at each time, and the samples including dental implants and surrounding bone were collected and processed for histological analysis. RESULTS: More newly formed bone and a better bone healing process were observed in control group. The histomorphometric analysis revealed that the mean percentage of bone-to-implant contact in the control group was significantly higher than that of the experimental group (25.23 vs. 8.16 %; P < 0.05, independent-simple t test, analysis of variance [ANOVA]). CONCLUSIONS: The results indicate that in the addition of PRP to bovine-derived xenograft in the repair of bone defects around the implant, PRP may delay peri-implant bone healing.

A multivariate receptor modeling study of air-borne particulate PAHs: Regional contributions in a roadside environment.

Understanding the geographic source contributions by particulate polycyclic aromatic hydrocarbons (PAHs) is important for the Korean peninsula due to its downwind location from source areas. Regional influence of particulate PAHs was previously identified using diagnostic ratios applied to mobile source dominated roadside sampling data (Kim et al., 2012b). However, no study has yet been conducted to quantify the regional source contributions. We applied a multivariate receptor modeling tool to identify and quantify the regional source contributions to particulate PAHs in Seoul. Sampling of roadside particulate PAHs was conducted in Seoul, Korea for four years between May 2005 and April 2009, and data analysis was performed with a new multivariate receptor model, Solver for Mixture Problem (SMP). The SMP model identified two sources, local mobile source and transported regional source, and quantified their source contributions. Analysis of the particulate PAHs data reveals three types of episodic periods: a high regional source contribution period with one case, a high mobile source contribution period with three cases, and a normal contribution period with eight cases. Four-year average particulate PAHs source contributions from the two sources are 4.6 ng m(-3) and 10.7 ng m(-3) for regional and mobile sources, respectively and equivalent to 30% and 70% of the total estimated contribution from each of these sources.

Facelift incision and superficial musculoaponeurotic system advancement in parotidectomy: case reports.

Surgical procedures for parotidectomy had been developed to gain adequate approach, prevent morbidity of nerve, and give esthetic satisfaction. We performed two cases of parotidectomy through facelift incision. One case was reconstructed with superficial musculoaponeurotic system (SMAS) flap and sternocleidomastoid (SCM) muscle rotated flap at the parotid bed. In second case, same procedures were performed, but collagen membrane was additionally implanted for prevention of Frey's syndrome. After surgery, two cases showed esthetic results without neck scar and hollow defect on parotid bed area.

Retrospective study of changes in pharyngeal airway space and position of hyoid bone after mandibular setback surgery by cephalometric analysis.

BACKGROUND: The posterior movement of mandible was known as the main cause of the changes in the pharyngeal airway space (PAS) and the postoperative obstructive sleep apnea (OSA). The purpose of this study was to know the changes of PAS and position of hyoid bone. METHODS: Lateral cephalographies of 13 patients who had undergone sagittal split ramus osteotomy (SSRO) setback surgery were taken preoperatively (T1), postoperatively within 2 months (T2), and follow-up after 6 months or more (T3). On the basis of F-H plane, diameters of nasopharynx, oropharynx, and hypopharynx were measured. The movements of the soft palate, tongue, and hyoid bone were also measured. RESULTS: The amount of mandible setback was 7.5 ± 3.8 mm. In the measurements of PAS, there was a statistically significant decrease of 2.8 ± 2.5 mm in nasopharynx (P < 0.01), and 1.7 ± 2.4 mm in oropharynx (P < 0.01) were observed after surgery. The hypopharynx decreased 1.0 ± 2.1 mm after surgery and continuously decreased 1.0 ± 2.8 mm at follow-up. The changes in hyoid bone position showed the posterior movement only after surgery and posteroinferior movement at follow-up. CONCLUSIONS: The PAS such as nasopharynx, oropharynx, and hypopharynx showed relatively high correlation with the amount of mandibular setback. The change of resistance in upper airway may be important for the prevention of OSA after mandibular setback surgery.

Odontogenic carcinosarcoma of the mandible: a case report and review.

Odontogenic carcinosarcoma is an extremely rare malignant odontogenic tumor with only a few reported cases. It is characterized by a true mixed tumor showing malignant cytology of both epithelial and mesenchymal components. It has been assumed to arise from pre-existing lesions such as ameloblastoma, ameloblastic fibroma, and ameloblastic fibrosarcoma. To date, the reported cases have exhibited considerably aggressive clinical behavior. The case of an odontogenic carcinosarcoma in the mandible of a 61-year-old male is described herein. The tumor destroyed the cortex of the mandible and invaded the adjacent tissues. Treatment was performed by surgical resection and reconstruction. The purposes of this article are to introduce odontogenic carcinosarcoma through this case study, to distinguish it from related diseases and to discuss features of the tumor in the existing literature.

Characterization of particulate matter concentrations and bioaerosol on each floor at a building in Seoul, Korea.

Particulate matter (PM) in buildings are mostly sourced from the transport of outdoor particles through a heating, ventilation, and air conditioning (HVAC) system and generation of particle within the building itself. We investigated the concentrations and characteristic of indoor and outdoor particles and airborne bacteria concentrations across four floors of a building located in a high-traffic area. In all the floors we studied (first, second, fifth, and eighth), the average concentrations of particles less than 10 µm (PM10) in winter for were higher than those in summer. On average, a seasonal variation in the PM10 level was found for the first, fifth, and eighth floors, such that higher values occurred in the winter season, compared to the summer season. In addition, in winter, the indoor concentrations of PM10 on the first, fifth, and eighth floors were higher than those of the outdoor PM10. The maximum level of airborne bacteria concentration was found in a fifth floor office, which held a private academy school consisting of many students. Results indicated that the airborne bacteria remained at their highest concentration throughout the weekday period and varied by students' activity. The correlation coefficient (R (2)) and slope of linear approximation for the concentrations of particulate matter were used to evaluate the relationship between the indoor and outdoor particulate matter. These results can be used to predict both the indoor particle levels and the risk of personal exposure to airborne bacteria.

Analysis of latency performance of bluetooth low energy (BLE) networks.

Bluetooth Low Energy (BLE) is a short-range wireless communication technology aiming at low-cost and low-power communication. The performance evaluation of classical Bluetooth device discovery have been intensively studied using analytical modeling and simulative methods, but these techniques are not applicable to BLE, since BLE has a fundamental change in the design of the discovery mechanism, including the usage of three advertising channels. Recently, there several works have analyzed the topic of BLE device discovery, but these studies are still far from thorough. It is thus necessary to develop a new, accurate model for the BLE discovery process. In particular, the wide range settings of the parameters introduce lots of potential for BLE devices to customize their discovery performance. This motivates our study of modeling the BLE discovery process and performing intensive simulation. This paper is focused on building an analytical model to investigate the discovery probability, as well as the expected discovery latency, which are then validated via extensive experiments. Our analysis considers both continuous and discontinuous scanning modes. We analyze the sensitivity of these performance metrics to parameter settings to quantitatively examine to what extent parameters influence the performance metric of the discovery processes.